Henny-penny OFE/OFG-322 Manuel d'utilisateur télécharger pdf (Page 26)

Model OFE/OFG-321,322,323,324

2-22. AUTOLIFT

ACTUATOR (MOTOR)

REPLACEMENT

(if applicable) (Continued)

5. Disconnect actuator connector and cut the wires from the other

half of the connector, as shown at left. The new actuator wires

do not have a connector on them and must be connected

directly to the wires on the unit.

6. Using a 3/8 socket, remove the 3 nuts securing the bottom of

the actuator bracket.

7. Remove trim strip from front of shroud.

8. Using a 15T torx driver, remove the 4 torx screws from the pair

of actuators.

2-26 606

CUT WIRES

HERE

1 2 ... 21 22 23 24 25 26 27 28 29

Pas de commentaire

Henny-penny OFE/OFG-322 Manuel d'utilisateur Page 26