Henny Penny 500 Manuel d'utilisateur télécharger pdf (Page 11)

Model 500/600

2-1. INTRODUCTION

This section provides the installation instructions for the electric and

gas models of Henny Penny Pressure Fryers.

Installation of this unit should be performed only by a qualified

service technician.

Do not puncture the fryer with any objects such as drills or

screws as electrical shock or component damage could result.

2-2. UNPACKING

INSTRUCTIONS

The fryer is shipped bolted to a wooden base and covered

with a cardboard container. Both gas and electric models

are shipped completely assembled. If ordered, optional

casters are packaged and shipped separately.

1. Cut the band from around the bottom of the carton.

Any shipping damage should be noted in the presence of the

delivery agent and signed prior to his or her departure.

2. Lift the carton from the fryer.

3. Open the lid of the fryer and remove the basket plus

all accessories.

4. Lay the fryer on its side, resting it in supports.

Take care when moving the fryer to prevent personal injury.

The fryer weighs approximately 300 lbs. (136 kgs).

1207 2-1

Step 2

Step 4

SECTION 2. INSTALLATION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 65 66

Pas de commentaire

Henny Penny 500 Manuel d'utilisateur Page 11