Henny-penny MP-944 Manuel d'utilisateur télécharger pdf (Page 6)

Model MP-941/942/943/944

SECTION 2. INSTALLATION

2-1. INTRODUCTION This section provides the installation instructions for

the Henny Penny Multipurpose Holding Cabinet.

Installation of this unit should be performed by a

qualified service technician.

Do not puncture the skin of unit with drills or

screws as component damage or electrical shock

could result.

2-2. UNPACKING The Henny Penny Multipurpose Holding Cabinet has been

tested, inspected, and expertly packed to ensure arrival at

its destination in the best possible condition. The cabinet

rests on cardboard pads that sit on a wooden skid. The unit

is then packed inside a heavy cardboard carton with

sufficient padding to withstand normal shipping treatment.

Any shipping damages should be noted in the

presence of the delivery agent and signed prior to

his or her departure.

To remove the unit from the carton, you should:

1. Carefully cut banding straps.

2. Lift carton off the unit.

3. Lift the unit from the cardboard pads and skid.

Take care when lifting unit to prevent personal

injury. The units can weigh as much as 278 lbs.

(126 kg).

203

2-1

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Pas de commentaire

Henny-penny MP-944 Manuel d'utilisateur Page 6