Henny-penny MP-944 Manuel d'utilisateur télécharger pdf (Page 14)

Model MP-941/942/943/944

3-6. OPERATION AND 2. While holding in on the drawer button, press and

PROGRAMMING release the SET button. Now the setpoint temperature

(Continued) will be blinking at a faster rate. Now release the

drawer button.

3. Press the UP and DOWN buttons to change the

setpoint temperature.

4. Once the desired setpoint temperature is reached,

press the SET button to return to normal operation

mode and the setpoint will be saved.

Special Program Mode

1. Turn the POWER switch off. Press and hold both

the UP and DOWN buttons and turn the POWER

switch back on. Press and hold the UP and DOWN

buttons until “SP” shows on the display, then release

the UP and DOWN buttons. Display will now show

“°F” or “°C”.

2. Press the UP or DOWN buttons to toggle from

“°C” (Celsius), or “°F” (Fahrenheit).

3. Press and release the SET button, and display will

show “CAL”. Press and hold the button of the drawer

to be calibrated, and use the UP and DOWN buttons

to match the display to the actual temperature.

4. After the calibration mode, press and release the SET

button to access Initialization Mode.

5. Press and hold either the UP or DOWN button until

display reads “In- SYS”. This resets all setpoint

temperatures to 180

F (82º C).

6. After the initialization mode, press and release the

SET button the access the Output Test Mode.

7. “OP” will show in the display. Press and release any

of the drawer buttons to turn the relays and heaters off

and on.

8. After the output test mode, press and release the SET

button to access the Display Mode.

9. If “C=y” shows in the display, the time of day shows

in the display during normal operation. If “C=n”

shows in the display, “ON” shows on the display

during normal operation. Press and release the UP

and DOWN buttons to toggle from “y” to “n” or

vice versa.

10. Press and hold the set button to exit Special Program

Mode at any time.

203 3-5

1 2 ... 9 10 11 12 13 14 15 16 17 18

Commentaires sur ces manuels

Pas de commentaire

Henny-penny MP-944 Manuel d'utilisateur Page 14

Commentaires sur ces manuels